Write sensor parameter via Siemens TI

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Contents:
Connect units
Configuration – AL1100 in TIA Portal V13
IO-Link parameter – O5D100
Read sensor parameter – S7-315-2 PN/DP
Read sensor parameter – S7-1500

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Connect units
Laptop / PC
with Siemens TIA Portal V13
AL1100
Siemens PLC

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Install GSDML files for this device – Get GSDML file
Download current GSDML file
Update your cataloge
Choose AL1100 and insert it to your network
2. Configuration – AL1100 in TIA Portal V13

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Connect O5D100 to port 1
Download IODD PDF
2. Configuration – AL1100 in TIA Portal V13

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Connect O5D100 to port 1
This device has 2Byte cyclic data
Last 4bits has to ignore
2. Configuration – AL1100 in TIA Portal V13

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Set-up your port length
Choose ‚IO-Link 2Byte + PQI‘
Put it with Drag&Drop to your port
Set your input-area
2. Configuration – AL1100 in TIA Portal V13

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Parameter 80 – Laser On/Off
3. IO-Link parameter – O5D100
8 Bit -> value ‚1‘ to LEN (IO_Link_Device function block)

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Find the ID for IO_Link_Device function block
First input address of the port
4. Read sensor parameter – S7-315-2 DP/PN

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Find the ID for IO_Link_Device function block
First input address of the port
ID and PORT is linked! If you change your port, you have to change your ID as well!!
CAP = 16#B400
4. Read sensor parameter – S7-315-2 DP/PN

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Find the data
There will appear your data
4. Read sensor parameter – S7-315-2 DP/PN

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Find the ID for IO_Link_Device function block
Hardware indentifier has convert to hexadecimal
270 dec -> 10E hex
5. Read sensor parameter – S7-1500

Date: 23.12.2016
Page:
© ifm ecomatic gmbh
Find the ID for IO_Link_Device function block
Hardware indentifier
ID and PORT is linked! If you change your port, you have to change your ID as well!!
CAP = 16#B400
5. Read sensor parameter – S7-1500