GOCUZ Catalogue

4 + GOC Co., Ltd.
Furcation Tube
Tight Buffered Fiber 07 Optical Cord Cable 08 4C Zip Cord
09 Flat Cable
Ribbon Cord Cable
Ribbon Cord Cable (Double Jacket)
Distribution Optical Cable
Distribution Cable
Fig-8 Distribution Cable
Distribution Cable (Duct Type)
Armored Distribution Cable (Aerial Type)
Breakout Cable
Loose Tube Cable
Duct Loose Tube Cable (SJSA)
Duct Loose Tube Cable (Non-metallic)
Flame Retardant Duct Loose Tube Cable
ADSS Cable (Single Jacket)
ADSS Cable (Double Jacket)
Anti-Rodent ADSS Cable
Fig-8 Loose Tube Cable (Non-metallic)
Aerial Loose Tube Cable
Distribution Loose tube Cable (Fig-8 Type)
Distribution Loose tube Cable (Duct Type)
Direct Buried Loose Tube Cable
Central Loose Tube Cable
Flat Central Loose Tube Cable
Armored Central Loose Tube Cable
PIMC Micro-duct Tube
PIMC (Pulling Installation Micro Duct Loose Cable)
Micro Sheath Cable
Dry Core Micro Sheath Cable
Micro Sheath Cable (Distribution Type)
Micro Sheath Cable (Breakout Type)
Fig-8 Micro Sheath Cable
Special Cable
Nuclear RR Indoor Fiber Optic Cable
Nuclear RR Loose Fiber Optic Cable
Steel Armored Optical Cable
Steel Armored Cable (Double Sheath)
Steel Armored Duplex Cord
Dry Core Optical Cable
Specialty Optical Patch Cord
Military Tactical Optical Cable
Emergency Repairing Optical Cable
Hybrid Cable
Hybrid Cable (3C Copper + 4C Optical Fiber)
Hybrid Cable 1 RRU
Hybrid Cable 3 RRU
Hybrid POF Fig-8 Type Distribution Cable
FTTx Cable
FTTH Optical Cable (Buffer Type)
FTTX Drop Cable (Fiber Type)
FTTX Distribution Cable (Double Sheath)
FTTH Indoor Drop Cable (Rectangle Type)
FTTH Outdoor Drop Cable (Rectangle Type)
Fig-8 Type Optical Cable
Air Blown Fiber
ABMC (Air Blown Micro Cable)
Micro Trenching Cable
Buffer type Central loose tube cable
FTTH Transparent Strong Buffer & Rail
63 Buffer Type Dry Core Drop Cable
64 Buffer Type Mini Drop Cable
65 FTTH Fig-8 Mini Distribution Cable
66 Fiber Type Mini Drop Cable
67 FTTx Pre-Connectorized Patch cord
Optical PLC Splitter
68 Fan-Out Type PLC Splitter 1(2) X N 48, 49
70 Integrated Type PLC Splitter 1 X N
71 Box Type PLC Splitter 1(2) X N
Accessory
72 Field Installable Connector
73 Fiber Optic Patch Cord
74 Access Terminal Box
75 Aerial TYPE Joint closure(Ventilation type)
76 Aerial Type Fiber Optic Terminal Box
77 Pole Type Fiber Optic Distribution Box
78 Optical Distribution Cabinet (ODC)
79 Fiber Optic Cable Clamp
80 S-Type Fastener
81 C-Type Wire Retractor
82 Optical Connector Plier
CCOONNTTEENNTTSS
Indoor Outdoor Cable
OOPPTTIICCAALL FFIIBBEERR CCAABBLLEESS
63
64
65
66
68
69
70
71
72
73
74
75
76
77
78
79
80
Field Installable Connector Fiber Optic Patch Cord Access Terminal Box
Aerial TYPE Joint closure(Ventilation type) Aerial Type Fiber Optic Terminal Box
Pole Type Fiber Optic Distribution Box Optical Distribution Cabinet (ODC) Fiber Optic Cable Clamp
S-Type Fastener
C-Type Wire Retractor Optical Connector Plier
FTTH Fig-8 Mini Distribution Cable Fiber Type Mini Drop Cable
FTTx Pre-Connectorized Patch cord
Optical PLC Splitter
Fan-Out Type PLC Splitter 1(2) X N 48, 49 Integrated Type PLC Splitter 1 X N
Box Type PLC Splitter 1(2) X N
Accessory

Indoor Cord & Cable
Indoor Cord & Cable + 5
FURCATION TUBE
CHARACTERISTICS
DESCRIPTION
▶ Furcation tube is used for protection of optical fiber or tight buffered fiber.
▶ Coating considering the easy insertion of fiber core & flexibility for convenience of handling.
▶ The Tube is manufactured using Aramid Yarn for Fan Out Tubing, offering two types with Simplex Fan Out Tubing & Duplex Fan Out Tubing, to enhance the Tensile Load and protect the optical fiber.
▶ Consisting of two simplex Sub-units for Duplex Fan Out Tubing enabling the insertion of 0.9mm tight buffers respectively.
FEATURES
▶ Accurate inner & outer diameters
▶ Easy insertion of optical fiber or buffer
▶ Use of standard colors(Easy color identification)
▶ Operating Temperanture Range:0~60℃
APPLICATIONS
▶ Connection to Single mode or Multimode optical fiber
▶ Connection between equipments
▶ Separation of optical fiber & tight buffer joints
▶ Medical devices
Inner Diameter
(500㎛)
Tube
Aramid y
Outer Ja (1.6~3.0
Outer Diameter (900㎛)
GOC UZ

6 + GOC UZ
600/900㎛ DIAMETER TIGHT BUFFERED FIBER
FEATURES
OPTICAL ATTENUATION
APPLICATIONS
OPTICAL FIBER CABLES
▶ Single-mode or Multimode optical fiber cable used
▶ Able to use 24 colors - 12 colors
- 12 colors(Line Marking added)
▶ Small & compact size with excellent flexibility
▶ Ease of use, Protecting optical fiber
▶ Operating Temperature Range : 0~60℃
▶ For Indoor cabling
▶ Used in pigtail
▶ Used in Passive/active devices
DESCRIPTION
▶ GOT Co.Ltd's Tight Buffered Fiber Cable product has been widely used in overall optical fiber communication industry for optical module cabling work between transceiver and pigtails of Laser/LED.
▶ The product has been diversely utilized for those applications of outdoor cable termination devices or subscriber's networking purpose, as well as the primary fundamental materials in manufacturing of indoor cables.
Optical Fiber
(9/125㎛, 50/125㎛, 62.5/125㎛)
UV Coating Layer
Tight Buffer
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
CHARACTERISTICS

Indoor Cord & Cable
Indoor Cord & Cable + 7
OPTICAL CORD CABLE
DESCRIPTION
OPTICAL ATTENUATION
FEATURES
▶ Single-mode or Multimode optical fiber used
▶ Compact & highly flexible
▶ Easy peeling for enabling (Guaranteed long life cycle)
▶ Made with Aramid Yarn
(Tensile Load & impact resistance enhanced)
▶ Operating temperature range : -20~70℃
APPLICATIONS
▶ Indoor or outdoor duct cabling
▶ Indoor cable network (FTTH)
▶ Horizontal cabling inside building
▶ LAN cabling
▶ Connection of pigtail & optical fiber cable connector
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
▶ Simplex and Duplex Cables are of stable construction
coated around the outside of Tight Buffer Fiber one more time with resin in order to maintain the outstanding mechanical, environmental & transmission characteristics for indoor installation.
▶ The product is manufactured with the Aramid Yarn nserted to enhance the Tensile Load and protect the optical fiber.
▶ Particularly, the coating can be conveniently removed without using any special equipments or tools in the event of indoor installation.
Tight Buffered
Fiber
Aramid yarn
Outer Jacket
CHARACTERISTICS
D: Outer Diameter
GOC UZ

8 + GOC UZ
4C ZIP CORD
DESCRIPTION
FEATURES
CHARACTERISTICS
OPTICAL ATTENUATION
APPLICATIONS
OPTICAL FIBER CABLES
▶ 4C Zip Cable is an optical fiber cable designed with 4 cores using Single mode and multimode optical fiber for the application of connection between the equipments.
▶ Mutual signal communication between the telecommunication equipments available, inserting Aramid Yarn for enhancement of Tensile Load and protection of optical fiber, provided with outstanding mechanical & environmental characteristics.
▶ Single-mode or Multimode optical fiber used
▶ Ease of handling with flexibility and light weight
▶ Ease of connection or core separation
▶ Operating Temperature Range : -20~70℃
▶ Connection of indoor systems
▶ Patch code of optical fiber cable distribution box
▶ Super high speed distribution network(FTTx)
▶ Housing Distribution Network
Tight Buffered Fiber
Aramid yarn Outer Jacket
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
D: Outer Diameter

Indoor Cord & Cable
Indoor Cord & Cable + 9
FLAT CABLE
CHARACTERISTICS
DESCRIPTION
▶ Resilient and flexible for jumpers, patch cords, and pigtails
▶ Suitable for general-purpose indoor use, such as routing connections in patching systems
▶ Short "patch cord" ideal for links between electronic equipment and main fiber optic cables
FEATURES & APPLICATIONS
▶ Compatible with all standard fiber optic connectors designed for small form-factor simplex and duplex connecters such as MT-RJ and LC connecters
▶ High performance tight-buffered coating on each optical fiber for environmental and mechanical protection
▶ Custom jacket colors are available to match connectors
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
Optical Fiber
Buffer
Strength member Duplex cord
Rip cord
Outer Sheath
GOC UZ

Indoor Cord & Cable
Indoor Cord & Cable + 15
DISTRIBUTION CABLE(Duct Type)
CHARACTERISTICS
Nylon or hytrel Vo Tight buffer
Aramid yarn
1ST. sheath LSZH Al tape
Outer sheath LSZH
FEATURES & APPLICATIONS
▶ Patch cords
▶ LAN distribution
▶ Outdoor cable
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Highly flexible & light weight
▶ Ease of peeling enabling fast connection
▶ Coating material : Flame retardant PVC, PU, LSZH etc.
▶ Operating Temperature Range : -40~70℃
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
GOC UZ

16 + GOC UZ
CHARACTERISTICS
OPTICAL FIBER CABLES
Optical fiber
buffer Aramid yarn
Central strength member Inner sheath
Rip cord Tape
Corrugation steel tape Outer sheath
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
ARMORED DISTRIBUTION CABLE(Aerial Type)
FEATURES & APPLICATIONS
▶ Include a layer of fiberglass yarn that provides an effective deterrent to damage caused by small non- burrowing rodents(not recommended for direct burial applications)
▶ FRP is ideal for use in surface installations
▶ Cables are suitable for use with single, as well as multi channel connectors
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.38 dB/km
@1383nm ≤ 0.38 dB/km @1550nm ≤ 0.25 dB/km @1625nm ≤ 0.28 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Used in areas that require a riser rating and are susceptible to damage from small non-burrowing rodents

18 + GOC UZ
OPTICAL FIBER CABLES
DUCT LOOSE TUBE CABLE (SJSA)
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ Best design for multimode and single-mode fiber hybrid/composite cables
▶ Design allows to be routed to multiple locations such as wiring racks and closets
▶ Designed for indoor/outdoor installations, including cable trays
▶ 12-288 fiber configurations are available with 6-12 fibers per tube
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Ideal for installations requiring a rugged and reliable cable design where maximum mechanical and environmental protection is necessary
▶ Typical industrial uses are factory automation, power generation and other utilities, oil and gas refining, and surface mining
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber
Jelly compound
Loose tube
Water swellable yarn Central strength member
Water swellable tape
Corrugated steed tape Outer jacket

Loose Tube Cable
Loose Tube Cable
+ 19
DUCT LOOSE TUBE CABLE (Non-metallic)
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ Best design for multimode and single-mode fiber hybrid/composite cables
▶ Design allows multi-fiber sub cables to be routed to multiple location such as wiring racks and closets
▶ Designed for indoor/outdoor installations, including cable trays
▶ 12-288 fiber configurations are available with 6-12 fibers per tube
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Ideal for installations requiring a rugged and reliable cable design where maximum mechanical and environmental protection is necessary
▶ Typical industrial uses are factory automation, power generation and other utilities, oil and gas refining, and surface mining
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber Jelly
Loose tube CSM
W/S yarn W/S tape Glass yarn
Rip cord Outer jacker
GOC UZ

20 + GOC UZ
FLAME RETARDANT DUCT LOOSE TUBE CABLE
CHARACTERISTICS
OPTICAL FIBER CABLES
Optical fiber Jelly compound
PBT loose tube Water swellable yarn
Central strength member Filler
Water swellable tape Outer sheath
FEATURES & APPLICATIONS
▶ High performance components and construction
UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from to floor
▶ Cable materials are indoor/outdoor : UV, water and fungus resistant
▶ Wide operating temperature range : -40~85℃
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Indoor/outdoor tight-biffered design allows cables to be installed in intra-building backbone and inter-building campus location without costly transitions between cable types
▶ Design allow multi fiber sub cables to be routed to multiple locations such as wiring racks and closets
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)

Loose Tube Cable
Loose Tube Cable
+ 21
ADSS CABLE (Single Jacket)
FEATURES & APPLICATIONS
CHARACTERISTICS
OPTICAL SPECIFICATIONS
Optical fiber
Jelly compound
Loose tube W/S yarn
Central strength member W/S tape
Rip cord
Aramid yarn Outer jacket
▶ Inner cable is a fully functional G-Series Sub grouping riser-rated cable
▶ High-performance components and construction 6-fiber or 12-fiber subgroups available
▶ The steel-armor is easily removed with an internal ripcord, leaving a fully functional intact riser-
rated inner cable with original cable markings for identification
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Ideal for installations where direct burial or rodent protection is required
▶ Design allows sub cables to be routed to multiple locations such as wiring racks and closets
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
GOC UZ

22 + GOC UZ
OPTICAL FIBER CABLES
CHARACTERISTICS
ADSS CABLE (Double Jacket)
Optical fiber
Jelly compound Loose tube W/S yarn
Central strength member
W/S tape
Rip cord
Inner jacket Aramid yarn Outer jacket
FEATURES & APPLICATIONS
▶ Inner cable is a fully functional G-Series Sub grouping riser-rated cable
▶ High-performance components and construction 6-fiber or 12-fiber subgroups available
▶ The steel-armor is easily removed with an internal ripcord, leaving a fully functional intact riser-
rated inner cable with original cable markings for identification
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Ideal for installations where direct burial or rodent protection is required
▶ Design allows sub cables to be routed to multiple locations such as witing racks and closets
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)

24 + GOC UZ
OPTICAL FIBER CABLES
Fig-8 LOOSE TUBE CABLE (Non Metallic)
CHARACTERISTICS
Support wire
Web Optical fiber Jelly
Loose tube CSM
Filler
Water swellable yarn Water swellable tape Glass tarn
Rip cord Outer jacked Stripe
FEATURES & APPLICATIONS
▶ Aerial type
▶ Outdoor cable
▶ FTTH (Fiber To The Home)
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Light weight, compact & ease of handling
▶ Economic construction for aerial cabling application
▶ Outstanding mechanical & environmental characteristics
▶ Operating Temperature Range : -20~70℃
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)

Loose Tube Cable
Loose Tube Cable
+ 25
AERIAL LOOSE TUBE CABLE
FEATURES & APPLICATIONS
▶ Outdoor aerial installations along utility poles for cable television, telecom or other outside plant campus backbone applications without the need fof cable lashing
▶ 1/4-inch galvanized messenger standard
▶ Polyethylene outer cable jacket for excellent UV and weather resistance
DESCRIPTION
▶ Figure-eight construction for use with standard messeng clamping and support hardware.
▶ Deal for new installations. The figure-eight messenger cable reduces installation time and cost by approximatel 50% compared to separate installation of a messenger wire and the lashing of the cable to the messenger.
▶ Wide operating temperature range of -40℃ to+85℃
Messenger unit Web
Optical fiber Jelly compound Loose tube
water swellable yam
CSM
Water blocking tape Rip cord
Al tape
Outer jacket
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
CHARACTERISTICS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
GOC UZ

26 + GOC UZ
OPTICAL FIBER CABLES
DISTRIBUTION LOOSE TUBE CABLE (Fig-8 Type)
TECHNICAL SPECIFICATIONS
▶1fiber / 1tube structure. Aramid yarn reinforce. High tensile strength.
FEATURES
▶ Applicable for self-supporting aerial installation
▶ Easy distribution
▶ Excellent mechanical & optical characteristics
▶ High tensile strength & characteristic
APPLICATIONS
▶ Aerial laying
▶ Luxury condominium & Common housing(FTTH)
▶ Office buildings, Government offices
OPTICAL ATTENUATION
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
CHARACTERISTICS
Standard color : Blue, Orange, Green, Brown, Gray, White, Red, Black, Pink, Turquise, Gold, Silver Optical Fiber : G652D
1.2mm loose tube
Filler
Water swellable yarn CSM
Notch Rip cord
Water swellable yarn
Aramid yarn AL tape
Outer jacket
Messenger unit
Web Optical fiber
Jelly compound

Loose Tube Cable
Loose Tube Cable
+ 27
CROSS SECTION
DISTRIBUTION LOOSE TUBE CABLE (Duct Type)
CHARACTERISTICS
Standard color : Blue, Orange, Green, Brown, Gray, White, Red, Black, Pink, Turquise, Gold, Silver Optical Fiber : G652D
OPTICAL SPECIFICATIONS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
▶ 1fiber / 1tube structure.
Aramid yarn reinforce. High tensile strength.
FEATURES
▶ Applicable for duct or aerial installation
▶ Easy distribution
▶ Excellent mechanical & optical characteristics
▶ High tensile strength & characteristic
APPLICATIONS
▶ Aerial laying
▶ Luxury condominium & common housing(FTTH)
▶ Office buildings, Government offices
Optical fiber
Jelly compound
CSM
Rip cord
Water swellable yarn
Aramid yarn
AL tape
Outer jacket
GOC UZ

28 + GOC UZ
OPTICAL FIBER CABLES
DIRECT BURIAL LOOSE TUBE CABL
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ High-performance components and construction 6-fiber or 12-fiber per tube available
▶ The steel-armor is easily removed with an internal ripcord, leaving a fully functional intact riser-
rated inner cable with original cable markings for identification
▶ Helically stranded core for greater flexibility and mechanical protection of the optical fibers
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Ideal for installations where direct burial or rodent protection is required
▶ Design allows sub cables to be routed to multiple locations such as wiring racks and closets
▶ Ideal for installations requiring an extremely rugged and reliable cable design where maximum mechanical and environmental protection is necessary
Optical fiber Jelly compound
Loose tube W/S yarn
Central strength member W/S tape
Rip cord
Strength member Inner jacket
Rip cord
W/S tape
Corrugation steel tape
Outer jacket

Loose Tube Cable
Loose Tube Cable
+ 29
CENTRAL LOOSE TUBE CABLE
FEATURES & APPLICATIONS
CHARACTERISTICS
OPTICAL SPECIFICATIONS
▶ Easy handling, small, light
▶ Duct type, Aerial type
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Suitable outdoor application (Aerial Installation)
▶ ABC(Air Blown Cable)
▶ Single mode @1310nm ≤ 0.38 dB/km
@1383nm ≤ 0.38 dB/km @1550nm ≤ 0.25 dB/km @1625nm ≤ 0.28 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber
Jelly compound
Polycarbonate tube
Water swellable yarn Aramid yarn
Outer jacket
GOC UZ

30 + GOC UZ
OPTICAL FIBER CABLES
Rip cord
Outer sheath
FLAT CENTRAL LOOSE TUBE CABLE
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ Conduit, Duct, Aerial Laying
▶ Luxury Condominium & Common Housing(FTTH)
▶ Office Building, Government Offices
▶ CATV, Internet cafe
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.38 dB/km
@1383nm ≤ 0.38 dB/km @1550nm ≤ 0.25 dB/km @1625nm ≤ 0.28 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Application for conduit & aerial installation
▶ Small size and low friction
▶ Excellent mechanical & optical characteristics
▶ Light weight and cost efficient
Water swellable yarn
FRP
Optical fiber Jelly compound PBT tube

Loose Tube Cable
Loose Tube Cable
+ 31
ARMORED CENTRAL LOOSE TUBE CABLE
CHARACTERISTICS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Highly flexible & light weight
▶ Ease of peeling enabling fast connection
▶ Coating material : flame retardant PVC, PU, LSZH etc.
▶ Operating Temperature Range : -40~70℃
FEATURES & APPLICATIONS
▶ LAN distribution
▶ Outdoor cable
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.38 dB/km
@1383nm ≤ 0.38 dB/km @1550nm ≤ 0.25 dB/km @1625nm ≤ 0.28 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Corrugated steel tape
Optical fiber
Jelly compound
Polycarbonate tube
Water swellable yarn
Aramid yarn Rip cord
Inner jacket
Water swellable tape
Outer jacket
GOC UZ

Loose Tube Cable
Loose Tube Cable
+ 33
PIMC
( Pulling Installation Micro Duct Loose Cable)
DESCRIPTION
▶ Use Aramid Yarn to pull the cable through the Tube
▶ Suitable for Air Brown Micro Duct Tube
FEATURES&APPLICATIONS
▶ Single-mode Fiber Cable
▶ Installation method : Pulling installation (or Air Blown MAX.)
▶ Tensile Load : 2,500N ~ 3,000N
OPTICAL SPECIFICATIONS
▶ Length : 2km/drum
▶ PIMC Install length : MAX 1.0km
▶ Single mode @ 1310nm ≤0.36 dB/km
@ 1383nm ≤0.35 dB/km @ 1550nm ≤0.22 dB/km @ 1625nm ≤0.25 dB/km
PMD ≤0.2dB(ps/km1/2),
Cut-off wavelength≤1260nm
CHARACTERISTICS
GOC UZ

Micro Sheath Cable
Micro Sheath Cable
+ 35
MICRO SHEATH CABLE(Distribution Type)
DESCRIPTION
CHARACTERISTICS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
FEATURES & APPLICATIONS
▶ Intra building backbone
▶ OFD : optical Frame distribution
▶ FDDI, LAN distribution
▶ Indoor and outdoor cable
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber
Micro sheath
Strngth member
Outer jacket
▶ Distribution type(Max. 144core)
▶ Ease of handling with flexibility
▶ Ease of identification using 12 Colors
▶ Operating temperature Range : -20~70℃
GOC UZ

Micro Sheath Cable
Micro Sheath Cable
+ 37
FIG-8 MICRO SHEATH CABLE
CHARACTERISTICS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
FEATURES & APPLICATIONS
▶ Aerial type
▶ Outdoor cable
▶ FTTH (Fiber To The Home)
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Light weight, compact & ease of handling
▶ Economic construction for aerial cabling application
▶ Outstanding mechanical & environmental characteristics
▶ Operating Temperature Range : -40~70℃
Messenger unit Steel wire
Coloring fiber Aramid yarn
Inner jacket Outer jacket
GOC UZ

38 + GOC UZ
OPTICAL FIBER CABLES
Nuclear RR Indoor Fiber Optic Cable
FEATURES
▶ Vertical Tray Flame Test : IEEE1202(2006)
▶ Service Lifetime : 60 years
▶ 60 years total dose : 1.71KGy
▶ Accident dose : 55 KGy
▶ Operating Temperature : -10℃ ~ +85℃
OPTICAL SPECIFICATIONS
▶ Multi mode @ 1300nm ≤ 1.5dB/km
@ 850nm ≤ 3.5dB/km
▶ Core Diameter 62.5 ㎛
▶ Radiation Induced Attenuation(RIA)
≤ 6dB/km(~100Gy) @ 1300nm
≤ 10dB/km(~55KGy) @ 1300nm
References
▶ IEEE1682-2001
▶ IEEE323-2003
▶ IEEE383-2003
▶ IEEE1202-2006
▶ IEC60794-1-2
▶ IEC60793-1
▶ IEC60811-1-1
DESCRIPTION
▶ Nuclear Power Plant Serviceable Communication Device
▶ 60 Years of Life-time
▶ High Mechanical and Environmental Characteristics
▶ High Durability against High Temperature(110 ℃) by applying Special Material
▶ Low Smoke Zero Halogen
CHARACTERISTICS

Special Cable
Special Cable
+ 39
Nuclear RR Loose Fiber Optic Cable
CHARACTERISTICS
FEATURES
▶ Vertical Tray Flame Test : IEEE1202(2006)
▶ Service Lifetime : 60 years
▶ 60 years total dose : 15KGy
▶ Accident dose : 50KGy
▶ Operating Temperature : -20℃ ~ +85℃
OPTICAL SPECIFICATIONS
▶ Single mode @ 1310nm ≤ 0.38 dB/km
@ 1550nm ≤ 0.25 dB/km
▶ Chromatic Dispersion 3.2↓ps/nm.km@1310nmnm
22.0↓ps/km@1550nm
▶ Cut-off wavelength ≤ 1260nm
▶ Radiation Induced Attenuation(RIA)
≤ 6dB/km(~100Gy) @ 1300nm
≤ 10dB/km(~55KGy) @ 1300nm
References
▶ IEEE1682-2001
▶ IEEE323-2003
▶ IEEE383-2003
▶ IEEE1202-2006
▶ IEC60794-1-2
▶ IEC60793-1
▶ IEC60811-1-1
DESCRIPTION
▶ Nuclear Power Plant Serviceable Cable
▶ Apply Radiation Resistant Optical Fiber & Sheath Material
▶ 60 Years of Life-time
▶ High Mechanical & Environmental Characteristics
▶ High Durability against High Temperature(110 ℃) by applying Special Material
▶ Low Smoke Zero Halogen
GOC UZ

Special Cable
Special Cable
+ 41
STEEL ARMORED CABLE(Double Sheath)
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ Patch cords
▶ LAN distribution
▶ Outdoor cable
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Highly flexible & light weight
▶ Ease of peeling enabling fast connection
▶ Coating material : flame retardant PVC, PU, LSZH etc.
▶ Operating temperature Range : -40~70℃
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber
Steel armored
Inner jacker
TA braid
Outer jacker
GOC UZ

Special Cable
Special Cable
+ 43
DRY CORE OPTICAL CABLE
DESCRIPTION
CHARACTERISTICS
OPTICAL ATTENUATION
FEATURES
▶ Applicable for conduit & aerial installation
▶ Use with both optical fiber & tight buffer available
▶ Easy connection of optical fiber connector
▶ Excellent mechanical & optical characteristics
▶ Coating materials : Flame retardant LSZH & etc.
▶ Operating Temperature Range : -40~70℃
APPLICATIONS
▶ Conduit, Duct, Aerial Laying
▶ Luxury Condominium & Common Housing(FTTH)
▶ Office Buildings, Government Offices
▶ CATV, lnternet cafe
F : Fiber
TBF : Tight Buffered Fiber
▶ Dry Core Cable is an optical fiber cable offering the
competitive cost by reducing the volume & weight for easier cable laying & installation, as the cable is
manufactured not using the jelly compound filler on the contrary with the loose tube type optical fiber cable.
▶ Tensile Load & compression characteristics are enhanced by inserting two steel wores or FRP, offering protection for optical fiber & tight buffer from puysical impact from outside with the gap provided inside the cable thereby resulting in excellent optical & mechanical characteristics.
▶ Variety of cable types is available depending on the number of cores of optical fiber cable & installing location
Fiber
Strength Member
Outer jacket
Tight Buffered Fiber
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
GOC UZ

44 + GOC UZ
OPTICAL FIBER CABLES
Fiber
Strength Member
Outer jacket
Tight Buffered Fiber
SPECIALITY OPTICAL PATCH CORD
DESCRIPTION
CHARACTERISTICS
OPTICAL ATTENUATION
▶ Specialty Optical Fiber Jumper Cable is designed
to be suitable for the applications under vulnerable environments & special purpose applications considering the mechanical & environmental conditions.
▶ The optical fiber cable provides the special connector arrangement on both ends of cable for the ease of cable laying concenience & connections at emergency situations.
FEATURES
▶ Connection of specialty optical fiber connector of 1~4 core cables
▶ Connector construction of protective cover connecting section
▶ Ease of handling with compact & light weight
▶ Tubing with Aluminum or Stainless Steel provided with diverse connector connection availability
▶ Use of cable moving bobbin for easy moving for emergency application
▶ Coating Materials : Flame retardant LSZH
▶ Operating Temperature Range : -40~70℃
APPLICATIONS
▶ For emergency area, national disaster area & military applications
▶ For optical fiber cable assembly
▶ Communication terminals or connection between equipments
D : Outer Diameter
TBF : Tight Buffered Fiber
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.

Special Cable
Special Cable
+ 45
MILITARY TACTICAL OPTICAL CABLE
DESCRIPTION
CHARACTERISTICS
OPTICAL ATTENUATION
Central strength member
Tight buffered fiber
Aramid yarn
Inner jacket
Outer jacket
Rip cord
FEATURES
▶ Ease of handling when laying the cable (Excellent mechanical characteristics)
▶ Ease of handling with flexibility & light weight
▶ Similar construction with break out cable
▶ Coating materials : Flame retardant PU & etc.
▶ Operating Temperature Range : -40~70℃
APPLICATIONS
▶ Military tactical application
▶ Emergency recovery cable
▶ Mining, commercial & other risky areas
▶ Military tactical cable is of construction inserting two or
four optical fiber cords offering application to connector attached optical fiber cable as well with ease connection and handing of optical fiber cords at the cable ends.
▶ Insertion of 900 ㎛ tight buffer and aramid yarn protects the optical fiber strengthening the mechanical & environmental characteristics.
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
GOC UZ

OPTICAL FIBER CABLES
EMERGENCY REPAIRING OPTICAL CABLE
CHARACTERISTICS
OPTICAL ATTENUATION
FEATURES
▶ Excellent tensile strength & flexibility
▶ Use of bobbin for ease of cable laying & rewinding
▶ Connection with variety of connectors available
▶ Coating materials : Flame retardant PU & etc.
▶ Operating Temperature Range : -40~70℃
APPLICATIONS
▶ For Emergency Recovery, LAN
▶ Urgent temporary communication system
▶ For elevator application
▶ Emergency horizontal & vertical cable laying
▶ For tactical military operations
F: Fiber
D: Outer Diameter
TBF: Tight Buffered Fiber
Fiber
Strength Member
Outer jacket
Tight Buffered Fiber
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
46 + GOC UZ
DESCRIPTION
▶ Emergency Recovery Optical Fiber Cable is designed to conveniently install at the cable laying locations where the urgent connections are required prior to the normal recovery, by simply coiling on a bobbin after connecting the common connectors at the both ends of optical fiber cables.
▶ The optical fiber cable is of rectangular dry core construction, provided with strong withstandingperformance against the external environmental changes and superior mechanical characteristic.
▶ The cable is guaranteed with in outstanding tensile strength, flexibility, torsion characteristics & long term reliability meeting the application purpose of using under emergency situations.

Special Cable
Special Cable
+ 47
HYBRID CABLE
CHARACTERISTICS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
FEATURES & APPLICATIONS
▶ Connectivity environment : Hybrid Fiber
▶ Optic/Electrical
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Access control systems
▶ Airports
▶ Auto and storage lots
▶ Bridges
▶ CCTV video surveillance
▶ Commercial aerospace
Optical fiber
Tight buffer
Strength member Simplex cord
Water swellable yarn
AWG 16
Central strength member Water swellable tape
Rip cord
Al shield tape Outer jacket
GOC UZ

48 + GOC UZ
OPTICAL FIBER CABLES
HYBRID CABLE(3C cooper+4C optical fiber)
CHARACTERISTICS
Electric Power
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
FEATURES & APPLICATIONS
▶ Connectivity Environment : HYBRID FIBER
▶ OPTIC/ELECTRICAL
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
AWG14(0.26/41), Ф3.5mm
SM G.657b2
Tight buffer Aramid yarn
Simplex cord Ф3.5mm
Central strength member Rip Cord
Inner jacket
Aramid yarn Outer jacket
DESCRIPTION
▶ Access Control Systems
▶ Airports
▶ Auto and Storage Lots
▶ Bridges
▶ CCTV Video Surveillance
▶ Commercial Aerospace

OPTICAL FIBER CABLES
FTTX OPTICAL CABLE(Buffer Type)
CHARACTERISTICS
OPTICAL ATTENUATION
DESCRIPTION
▶ Designed to allow the mixed use of single mode & multimode optical fiber cables together within the same cabling.
▶ Allow using maximum 6 cores of optical fiber or tight buffer cables, inserted with aramid yarn for excellent mechanical&environmental characteristics.
FEATURES
▶ Easy connection of optical fiber connectors
▶ Outstanding workability for vertical & horizontal installations
▶ Use of complex type cable available (Single mode, Multimode)
▶ Ease of handling with light weight & thin diameter
▶ Coating materials : Flame retardant PU
▶ Operating Temperature Range : -20~70℃
APPLICATIONS
▶ Indoor/Outdoor
▶ Condominium
▶ LAN
▶ Integrated residential network (Internet, Home Automation System, Communication Training & etc.)
F: Fiber
D: Outer Diameter
TBF: Tight Buffered Fiber
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
52 + GOC UZ
Tight buffered fiber
Aramid yarn
Outer jacket

FTTX Cable
FTTX Cable
+ 53
FTTX DROP CABLE(Fiber Type)
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ Suitable for indoor or outdoor applications
▶ Jacket is UV, fungus and moisture resistant
▶ 1F : buffer type, 2/4/6F : coloring fiber type . Jacket material : Frame retardant polyurethan
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
DESCRIPTION
▶ Indoor/outdoor tight-buffered cable design for use installations requring a flame-retardant, low-smoke and zero-halogen cable
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.38 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.25 dB/km @1625nm ≤ 0.30 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
Optical fiber
Buffered
Strength member
Outer jacket
Coloring fiber
Strength member
Outer sheath
GOC UZ

54 + GOC UZ
OPTICAL FIBER CABLES
FEATURES & APPLICATIONS
CHARACTERISTICS
OPTICAL SPECIFICATIONS
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
▶ Patch cords
▶ LAN distribution
▶ Outdoor cable
▶ Single mode @1310nm ≤ 0.40 dB/km
@1383nm ≤ 0.36 dB/km @1550nm ≤ 0.30 dB/km @1625nm ≤ 0.35 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.5 dB/km
@1300nm ≤ 1.5 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Highly flexible & light weight
▶ Ease of peeling enabling fast connection
▶ Coating material : flame retardant PU, LSZH etc.
▶ Operating temperature range : -40~70℃
FTTX DISTRIBUTION CABLE(Double Sheath)
Buffered fiber
Inner jacket(indoor)
Strength member
Outer jacket

FTTX Cable
FTTX Cable
+ 55
DESCRIPTION
CHARACTERISTICS
OPTICAL ATTENUATION
FTTX INDOOR DROP CABLE(Rectangle Type)
▶ Tensile load & compression characteristics are
enhanced by inserting two FRPs or ARPs, offering protection for optical fiber from physical impact outside with the gap provided inside the cable there by resulting in excellent optical & mechanical characteristics
FEATURES
▶ Use for indoor connecting
▶ Small size
▶ Light weight and cost efficient
▶ Structure used for pushing install
APPLICATIONS
▶ Conduit, Duct laying
▶ From OTP to OTP
▶ CATV, FTTH
▶ Office building, government office
Standard color : Blue Optical Fiber : G.657A2
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
Optical fiber
Strength member
Outer jacket
GOC UZ

56 + GOC UZ
OPTICAL FIBER CABLES
FTTX OUTDOOR DROP CABLE(Rectangle Type)
FEATURES
▶ Applicable for conduit & aerial installation
▶ Use with both optical fiber & tight buffer available
▶ Small size and low friction
▶ Excellent mechanical & optical characteristics
▶ Light weight and cost efficient
APPLICATIONS
▶ Conduit, duct, aerial laying
▶ Luxuy Condominium & Common Housing(FTTH)
▶ Office buildings, Government offices
▶ CATV, Internet cafe
OPTICAL ATTENUATION
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
CHARACTERISTICS
Standard color : Blue, Orange, Green, Brown, Gray, Whire, Red, Black, Pink, Aqua Optical Fiber : G657 A/B
DESCRIPTION
▶ Tensile load & compression characteristics are enhanced by inserting a steel wire and FRPs, offering protection for optical fibers from physical impact from outside with the gap provided inside the cable thereby resulting in excellent optical & mechanical characteristics.
▶ Possible to push wire without using any lead wire because of low friction in cable jaket.
Messenger unit
Strength member
colored fiber Outer jacket

FTTX Cable
FTTX Cable
+ 57
Fig-8 TYPE OPTICAL CABLE
DESCRIPTION
OPTICAL ATTENUATION
FEATURES
▶ Light weight, compact & ease of handling
▶ Economical construction for aerial cabling application
▶ Outstanding mechanical & environmental characteristics
▶ Coating materials : Flame retardant LSZH & etc.
▶ Operating Temperature Range: -40~70℃
APPLICATIONS
▶ LAN
▶ Subscriber network
▶ CATV, PC Cafe
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
CHARACTERISTICS
▶ Outdoor type Cable purposely manufactured for ease of
cabling between the electric poles or leading into buildin from pole, manufactured with the self standing, "8" shape construction.
▶ Designed to have the appropriate tensile load considerin the cable laying stress and stable Bending characteristic
▶ Offering excellent mechanical & environmental characteristics that may occur after the cable laying wor considering the stress &impact from outside and weathe change.
Messenger wire
Tight buffered fiber
Aramid yarn
Outer jacket
D: Outer Diameter
GOC UZ

FTTX Cable
FTTX Cable
+ 59
ABMC(AIR BLOWN MICRO CABLE)
CHARACTERISTICS
FEATURES & APPLICATIONS
▶ High performance components and construction UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from floor th floor
▶ Cable materials are indoor/outdoor : UV, water and fungus resistant
▶ Wide operating temperature Range : -40~+85℃
#Above cable construction & feature may be revised without prior notice to implement the quality improvement.
OPTICAL SPECIFICATIONS
▶ Single mode @1310nm ≤ 0.36 dB/km
@1383nm ≤ 0.35 dB/km @1550nm ≤ 0.22 dB/km @1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km½), Cut-off wavelength ≤ 1260nm
▶ Multi mode @ 850nm ≤ 3.0 dB/km
@1300nm ≤ 1.0 db/km
50/125㎛(OM2, OM3, OM4), 62.5/125㎛(OM1)
DESCRIPTION
▶ Indoor/outdoor tight-buffered design allows cables to be installed in intra-building backbone and inter-building compus locations without costly transitions between cabl types
▶ The construction of the cable allows multi fiber sub cable to be routed to multiple locations such as wiring racks and sets
Optical fiber
Jelly compound PBT loose tube
Water swellable yarn CSM
Water swellable tape
Rip cord Outer jacket
(HDPE, core-lock type)
GOC UZ

62 + GOC UZ
OPTICAL FIBER CABLES
FTTH Transparent Strong Buffer & Rail
DESCRIPTION
▶ Indoor Purpose
▶ Transparent Buffer
▶ Strength Member : Aramid yarn
FEATURES&APPLICATIONS
▶ Single-mode fiber cable
▶ Installation method : fixed by inserting to the rail
▶ MAX. Tensile Load : 50N
OPTICAL SPECIFICATIONS
▶ Single mode @ 1310nm ≤ 0.36 dB/km
@ 1383nm ≤ 0.35 dB/km @ 1550nm ≤ 0.22 dB/km @ 1625nm ≤ 0.25 dB/km
▶ PMD ≤ 0.2dB(ps/km1/2)
▶ Cut-off Wavelength ≤ 1260nm
CHARACTERISTICS

FTTX Cable
FTTX Cable
+ 63
FTTH FIG-8 DISTRIBUTION CABLE
FEATURES&APPLICATIONS
▶ Aerial type drop cable
▶ Outdoor cable
▶ Easy Installation
▶ FTTH(Fiber To The Home)
OPTICAL SPECIFICATIONS
▶ Single mode @ 1310nm ≤ 0.36 dB/km
@ 1383nm ≤ 0.36 dB/km @ 1550nm ≤ 0.22 dB/km @ 1625nm ≤ 0.30 dB/km
PMD ≤ 0.2dB(ps/km1/2)
Cut-off wavelength ≤ 1260nm
DESCRIPTION
▶ Single mode, 1 or 2 fibers
▶ Semi Strip Buffer
▶ Reinforced Aramid Yarn
▶ LSZH(FR-PE) Jacket
CHARACTERISTICS
GOC UZ

64 + GOC Co., Ltd.
OPTICAL FIBER CABLES
Fiber Type Mini Drop Cable
FEATURES&APPLICATIONS
▶Indoor Purpose Drop cable
▶Small Size
▶Light Weight
▶Duct Laying
▶Capable of Pushing into Tube(Low Friction)
▶FTTH(Fiber To The Home)
OPTICAL SPECIFICATIONS
▶Single mode @ 1310nm ≤ 0.36 dB/km
@ 1383nm ≤ 0.36 dB/km @ 1550nm ≤ 0.22 dB/km @ 1625nm ≤ 0.25 dB/km
PMD ≤ 0.2dB(ps/km1/2)
Cut-off wavelength ≤ 1260nm
DESCRIPTION
▶Single mode, 1 or 4 fibers
▶Reinforced FRP
▶Low Friction, LSZH Jacket
CHARACTERISTICS

FTTX Cable
FTTX Cable
+ 65
FTTx Pre-Connectorized Patch Cord
SPECIFICATIONS
DESCRIPTION
The Pre-Connectorized Drop & Cord cables could be used for the purpose of the transition from Fiber Distribution Terminal to the individual living units or Multi Dwelling Units (MDU), and provide quick and easy deployment with the increased reliability. It also allowsfast turn up service and network reach, and lowers maintenance costs

66 + GOC UZ
OPTICAL FIBER CABLES
Fan-Out Type PLC SPLITTER 1(2×) N
FURCATION DIMENSTION(mm)
PLC (planar lightwave circuit) splitter is fabricated by using silica optical waveguide technology. It features wide operating wavelength range,
good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N splitters that are tailored for specific applications. All products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirement.
GOC can provide customized designs to meet specialized applications, and also offer modulars assemblies that integrated other components to form a full function module.
APPLICATIONS
▶ FTTX Solutions
▶ Passive Optical Network(PON)
Parameter for 1xN PLC Splitter(Without Connector)

Optical PLC Splitter
Optical PLC Splitter
+ 67
Fan-Out Type PLC SPLITTER 1(2×) N
Parameter for 2xN PLC Splitter(Without Connector)
GOC UZ

68 + GOC UZ
OPTICAL FIBER CABLES
INTERGRATED TYPE PLC SPLITTER 1×N
SPLITTER STAINLESS BAR
DIMENSION FOR PLC BAR
APPLICATIONS
PLC (planar lightwave circuit) splitter is fabricated by using silica optical
waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N and 2 x N splitters that are tailored for specific applications. All products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirement.
GOC can provide customized designs to meet specialized applications, and also offer modulars assemblies that integrated
other components to form a full function module.
▶ FTTX Solutions
▶ Passive Optical Network(PON)
Parameter for 1xN PLC Splitter(Without Connector)
buffer
Fiber
Fiber

Optical PLC Splitter
Optical PLC Splitter
+ 69
BOX TYPE PLC SPLITTER 1(2)×N
PLC (planar lightwave circuit) splitter is fabricated by using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical signal power management. We provide a whole series of 1 x N and 2 x N splitters that are tailored for specific applications. All products meet Telcordia 1209 and 1221 reliability requirements and are certified by TLC for network development requirement.
GOC can provide customized designs to meet specialized applications, and also offer modulars assemblies that integrated other components to form a full function module.
APPLICATIONS
▶ FTTX Solutions
▶ Passive Optical Network(PON)
Unit(mm) Fan-out cable L(mm) W(mm) H(mm) A(mm) B(mm)
1(2) x 2-8 0.9mm or 2.0mm 100 80
1(2) x 16-32 0.9mm 120 80
1(2) x 16 2.0mm 120 80
1(2) x 32 2.0mm 140 115
1(2) x 64 0.9mm or 2.0mm 140 115
10
18
18
18
18
70 73
80 74
80 74
100 106
100 106
GOC UZ

70 + GOC UZ
OPTICAL FIBER CABLES
FIELD INSTALLABLE CONNECTOR
Specifications for GSC and GLC
INTRODUCTION
The Field Installable Connector is cost-effective, and is designed for reusage, ease of installation, optical attenuation from 1dB to 20dB, and Fiber Bragg Grating (FBG) for fiber monitoring system.
FIC requires no field polishing or epoxy, so no heat cure devices or special tooling are needed to terminate the fiber. It takes about one to two minutes per fiber to install a connector out in the field.

Accessory
Accessory
+ 71
FEATURES
▶ Low insertion loss
▶ High return loss
▶ Various connector type available
▶ 100% in-house tested
APPLICATIONS
▶ Fiber optic telecommunications
▶ Optical network equipments
▶ FTTH
▶ CATV, IPTV
▶ High speed transmission system
TECHNICAL SPECIFICATIONS
FIBER OPTICAL PATCH CORD
GOC UZ

72 + GOC UZ
ACCESS TERMINAL BOX
TECHNICAL SPECIFICATIONS
INTRODUCTION
GOC has designed Access Terminal Box(ATB) to protect and funcation as a terminal for fiber optic drop cable and/or patch cords in the FTTH Networks. ATB is compact and cost-effective, and being used for the Indoor closure.
This ATB accepts the field-installable connector, fusion splice, and 1×4 splitter and 1×4 coupler for termination.
FEATURES
Compact design for installation on the wall as well as inside the terminal panel.
Two screw mounting holes are compatible with the size of the wall switch and telephone box.
This box protects drop cable and other related optical fiber connection from accidental damage.
Two inner holders retain up to two fusion splice sleeves or splitters/couplers.
Inner storage area allows the minimum bend radius to prevent micro bends and attenuation.
Two adapter slots allows up to two SC Type duplex adapters.
Removable cover is designed for easy access.
OPTICAL FIBER CABLES

Accessory
Accessory
+ 73
Aerial Joint Closure (Ventilation type)
DESCRIPTION
▶ 1 X 8ch : 2ea, 1ⅹ16ch : 1ea optical splitter / 16 SC adapters can be mounted
▶ 16 drop cables(2.0mm*3.0mm) can be connected
▶ Passed humidity test : 2days, 55℃ / 90~96R.H
▶ IEC68-2-10 / 20 / 52
▶ IP 65 protection level
SPECIFICATIONS
PACKING
GOC UZ

74 + GOC UZ
OPTICAL FIBER CABLES
Aerial Type Fiber Optic Terminal Box
DESCRIPTION
▶ 1ⅹ16 optical splitters and 16 SC adapters can be mounted
▶ 16 drop cables can be connected
▶ Protection Class IP55
PACKING
SPECIFICATIONS

Accessory
Accessory
+ 75
Pole Type Fiber Optic Distribution Box
DESCRIPTION
▶ Installation / fixing method: wall-mounting or pole-mounting
▶ The maximum fiber capacity: 16 fibers
▶ Features : Fiber Optic Distribution Box could be used for the protection of the branch cables from the feeder cable in building in FTTH of PON technology
PACKING
SPECIFICATIONS
GOC UZ

76 + GOC UZ
OPTICAL FIBER CABLES
Optical Distribution Cabinet(ODC)
DESCRIPTION
▶ Installation / Fixing method: Bottom-mounting.
▶ Maximum Fiber Capacity ; 144 & 288 fibers
▶ Features
ODC is an intermediaclosure(housing) dividing a feeder cableinto the distribution cables. It is installed on the ground, and branched out by using splitter inside Feeder cable could obtain up to 144 cores or 288 cores. It satisfies waterproof characteristics.
SPECIFICATIONS
Fiber tray capacity
12F splicing & distribution tray 24F splicing & distribution tray
PACKING

Accessory
Accessory
+ 77
FEATURES
▶ Use to support messenger drop cable between the pole and house
▶ Accept 3.0mm diameter fiber optic drop cable
▶ Suitable for usage with most one and two pair drop cables
▶ Stainless steel tail wire, plastic(PVC) body
▶ RoHS compliant
▶ Mechanical (tensile) strength exceeds 50kg
▶ Patented
TECHNICAL SPECIFICATIONS
FIBER OPTIC CABLE CLAMP
GOC UZ

78 + GOC UZ
OPTICAL FIBER CABLES
S-TYPE FASTENER
DESCRIPTION
Binding or Pole self-supporting FTTH drop cable, then pull the cable
with the supporting device. (Material:304stainless steel wire, fire-retardant ABS plastic parts)
PACKING
SPECIFICATIONS

Accessory
Accessory
+ 79
C-TYPE WIRE RETRACTOR
DESCRIPTION
Use the screw to install the C-Type wire retractor on the outer wall of buildings, and connect the S type fastener to connect and fix the Self-supporting Optical Fiber Cable
PACKING
SPECIFICATIONS
GOC UZ

80 + GOC UZ
OPTICAL FIBER CABLES
OPTICAL CONNECTOR PLIER
(Optical Connector Extraction Tool)
FEATURES
PRODUCT LIST
▶ Design for ease of use with one hand
▶ Safe and easy installation and removal of each type optical connectors
▶ Excellent performance in areas of populated connections
▶ Accident Prevention from worket's carelessness
▶ High Reliability and Stability

Accessory
+ 81
DOMESTIC
Domestic
[email protected]
Overseas
[email protected]
E-mail
[email protected]
GOC (Headquarters & Main Factory)
10, Cheomdan venture-ro 60beon-gil, Buk-gu,
Gwangju, 61009 South Korea
Tel : [phone]
Fax : [phone]
E-mail :
[email protected]
GOC (Pangyo Sales Office)
U-Space2 B#1008-1, 670, Daewangpangyo-ro, Bundang-
gu, Seongnam-si, Gyeonggi-do, 13494 South Korea
Tel : [phone]
Fax : [phone]
Domestic sales :
[email protected]
Overseas sales :
[email protected]